Ghost 2 Immobiliser Problems

The Ghost 2 immobiliser, designed to protect cars from hacking or key cloning, is a discrete device that can be installed without damaging your vehicle. It stops you from starting your car unless you have entered the correct sequence of buttons in your vehicle. This is similar to a mobile password.

Stop/Start

Ghost immobilisers stop vehicles from being stolen by stopping the engine from running until it is issued the correct PIN code. This is done with no modification to the vehicle and is completely undetectable by thieves. The unit connects directly to the ECU via the CAN databus to immobilise a vehicle. This system is very similar to the one that automobile manufacturers have been using in their cars for many years, however, the thief can't add a new key or use key relay technology to bypass it, as they could with factory-installed systems.

Ghost Ghost can be fitted to any vehicle, van, motorhome, caravan or bike with an engine and is compatible with all major brands of vehicles. The same system is also compatible with electric cars. It's a great alternative to steering wheel locks and wheel clamps, and can be installed with a minimum of effort.

If the Ghost is activated, it will block all buttons in your car, preventing the ignition being started without the PIN code. This can be done via the Android or Apple mobile apps or by manually entering the code through your key fob. If a wrong code is entered, the app will display an indicator light and the Ghost will not allow the vehicle to start again. This is a great method to deter thieves. If the vehicle cannot be started and they are unable to get it started, they will leave.

The Ghost is a small, weatherproof device that is able to be hidden away in the most inaccessible parts of your vehicle. Installation takes between 20 and 30 minutes for each vehicle. It is also very simple to remove should you choose to change your vehicle or hand it in for service or valet parking. It is an TASSA (Tracking and Aftermarket Security Systems Association), insurance approved system, and is recognized by certain insurance companies. It also comes with a secure emergency Pin Code override and features the Service/Valet Mode which can be activated by pressing a button on the app or by using your key fob.

Disarm

Ghost immobilisers are not mechanical anti-theft devices that are able to be removed, are concealed in the car. They are nearly impossible to hack or bypass and, even if they are found, a thief cannot start the engine. A ghost immobiliser for sale immobiliser is capable of preventing key cloning and signal jamming and devices spoofing. These are the methods thieves use to gain access into vehicles equipped that have standard immobilisers.

An immobiliser operates by sending an electronic code to the ECU (electronic control unit). If a incorrect code is received and the vehicle does not start as the engine won't start. It is possible to disable a ghost immobiliser using a software tool, but it's extremely time-consuming and difficult to accomplish this. The software must be installed and operated by a authorized installer.

The Ghost immobiliser is a tiny system that sits within the vehicles wiring loom and is invisible to the naked eye after it has been installed. It won't show up on diagnostic systems, there are no LED indicators and it will not connect to the engine via the OBD port. It communicates in a silent manner through the CAN data circuit.

The system won't allow the vehicle to start unless it is given an input PIN code defined by the user. The code is entered by pressing buttons on the steering wheel or door panels, or centre console. This is a safer way to safeguard your car since it doesn't require an additional remote control or key fob.

In addition, Ghost offers a service mode which can be activated using the application on your mobile phone. This will allow you to give your keys to someone else for service or valet parking without entering the disarm sequence.

You should never remove the system on your Ghost by yourself, regardless of whether it is in service mode. This could damage the engine. It is recommended to speak with a TASSA-verified installer who can safely and correctly remove the system. Our most recent GHOST II immobilisers also come with an exclusive QR fingerprint sticker that is hidden in various areas of your vehicle, these are linked to our global security register. In the event that the system is removed and is sold on the black market, this will link it back to the original owner.

Anti-Hijack

The anti-hijack function is a very important feature of the Ghost Immobiliser 2. This system works like smart keys and is among the most secure methods to keep your car safe from thieves. The Ghost system will automatically switch on the hazard lights and stop the car's engine when the ignition is on and the vehicle is stationary. This allows the driver or passengers enough time to press a security button (depending on the vehicle) before the system is activated and the engine is once again allowed to start.

Contrary to many other systems that simply stop the engine once the ignition is switched on and on, the Ghost system is based on a specific controller and timer unit that will shut off the fuel cut-off valve 14 if it is activated after the set time, even in the event that the ignition is turned on! This delay period must be sufficient to allow the person who was hijacked to drive away and a distance sufficient from the vehicle that is stalled before the system can be activated.

The Ghost comes with an additional level of security that prevents common hacking techniques used to gain access to modern vehicles, such as relay attacks and key range extension. The Ghost system communicates in a quiet way and does not emit signals that can be picked by a thief using RF scanning or code-grabbing technology.

The Ghost system also features the Service/Valet mode that allows your vehicle to be started temporarily and driven without the need for an PIN code. This is great for those who park their car and only require it to be left for a short time for a few minutes, like to open the garage door or place groceries in the boot. The system will exit service mode according to speed and duration or via the simple PIN code entry procedure, giving you complete assurance that only YOU can utilize your vehicle!

Keyless Entry

With the increasing trend of contactless car immobiliser ghost theft Many customers are seeking out additional security options. This is especially relevant for those who have invested time or money into personalising their vehicle or own expensive vehicles. An immobiliser add-on can be an affordable method to stop this kind of theft since it can stop your vehicle from starting until the proper pin code is entered on your key fob.

Immobilisers are designed for different vehicle circuits, including ones that control starter motors and fuel pumps. They also can shut the car alarm to draw attention to and frighten away any potential thieves.

These devices communicate with the engine control unit (ECU) via the CAN data circuit. They also they stop thieves from trying to get around it by installing a brand new ECU or using the key programmer. These immobilisers are installed discreetly and leave no marks in your vehicle. They are also not detected by hi-tech thieves' tools.

Unlike other systems that require a separate application, or a tag to be carried on the person of the driver the Ghost immobiliser can only be disarmed by pressing a pattern of existing electronic buttons on your steering wheel, door panel and centre console, allowing you to choose a personal pin sequence. The pin can be easily changed and makes the device as secure as a bank card. It can also be more difficult to break since it requires as many as 20 presses.

ghost immobiliser price also comes with a Valet/Service mode, which allows users to deactivate it when you plan to surrender your vehicle for valet parking, or service. This allows the system to operate within the parameters like a 30-mph speed limit. The system can be reactivated with the original key or entry code.

Installed by our accredited installers It is the most secure and reliable aftermarket CAN-immobiliser that is available. It is also fully certified by Thatcham for insurance purposes. The Ghost 2 immobiliser is also provided with six QR fingerprint labels, an ISR contact card containing your unique QR code, as well as an emergency number that is secure that are kept in your purse or wallet of your vehicle.