Bio-Fires - An Eco-Friendly Alternative to Real Fires

Biofires are a warm and comfortable way to heat your home without harmful gases or soot. They are easy to set up and operate, similar to electric fires.

The BARDA contract supports the development of the BioFire emerging CoV panel, a nucleic acid amplification test to be used with BioFire filmArray Systems for detection of known and emerging human acoronaviruses in nasopharyngeal or samples as well as saliva samples.

Eco-friendly

Bioethanol is an eco-friendly alternative to wood or gas. The fuel is made from plant by-products and uses an natural process to convert sugars into alcohol. Bioethanol has numerous advantages over other types of fireplaces, including no harmful emissions and a smaller carbon footprint. Bioethanol is a healthier alternative to other fires as it doesn't produce smoke or soot. It doesn't require a flue and can be used in the garden or at home.

Multi-drug resistant bacteria (MDR) are one of the most dangerous health threats of today. Fortunately, modern testing methods can aid in identifying MDR bacteria and other infections early enough to stop further complications. BioFire FilmArray is one of these tests. This test utilizes an approach based on symptoms to identify the most common pathogens that cause sepsis. The results are accessible within an hour, meaning doctors can start treatment immediately.

The Molecular PCR process increases DNA and RNA molecules to millions or billions of copies. This permits the analysis of small bio Ethanol fires quantities of body fluids or tissues to determine if specific genetic sequences are present. It is a useful instrument for lab professionals and will help them detect serious diseases in a cost-effective and efficient manner. The BioFire film array PCR system is a revolutionary instrument for the diagnosis of infectious diseases. It can be used in a variety of settings including laboratories and hospitals.

For tests of your respiratory system, you could wipe a swab over your nose prior to sending it to the lab. BioFire's system allows doctors to take action quickly and has a short turnaround time. This means less time waiting for results and better patient outcomes.

The Chanouf Farm Biofire company has created an agroforestry recycling unit that makes use of olive and pear waste to make biomass power and organic charcoal. The products are sold to the public to replace traditional wood charcoal and coal briquettes with eco-friendly alternatives. These bio-waste products are also suitable to be burned in a Kachelofen fireplace, which produces radiant heat and is a more sustainable alternative to electric or gas fires.

Clean burning

When you use a bio fire you aren't only saving energy, but you're also helping the environment by using a renewable fuel source. Bioethanol's combustion does not release harmful gases, such as carbon dioxide. Instead, it releases heat and water vapour. This makes it a safer and go source cleaner alternative for indoor use.

Ethanol is produced by fermenting plant sugars. It is a renewable source of fuel. It is produced in a short time and will not be depleted like fossil fuels like coal and oil. The use of bioethanol can also help reduce dependence on foreign imports and reduces the risks that come with supply shortages.

Bio-fires are very easy to install and can be utilized in existing fireplace openings or as freestanding units. They are a good alternative to wood and gas fires. They are also an excellent choice for offices and homes that do not have chimneys or flues.

When a bio ethanol fireplaces-fire is lit, the burner is fitted with a special material that absorbs ethanol fuel liquid and makes it available for combustion. The ethanol is ignited by the flames and the vapours are released into the air via the vent. The flames appear more natural and give an amazing beauty that cannot be replicated using wood or gas fires.

Bio-fires have the advantage of not requiring a vent or flue to replenish oxygen used during combustion. They also don't produce carbon monoxide which must be vented out into the room in open fronted gas fires.

The BioFire Respiratory panel employs multiplex PCR to simultaneously test for respiratory pathogens. It takes approximately an hour. This allows doctors to detect and eliminate respiratory illnesses much faster than with conventional laboratory tests, which require visits to patients. This reduces time and costs for both the patient and health care system.

Safe indoors

Bio-fires are safer to use indoors than real fires, as they produce no smoke, ash or carcinogenic fumes. They also don't release carbon monoxide, which could be deadly if inhaled. The Bio ethanol Fuel fire-ethanol fuel that they use is flammable however, and you should be extremely careful when handling the burner and refuelling your fire. It should be replenished only after the burner is turned off and the flame is cool, and any spills need to be cleaned immediately.

The diagnostics offered by the company's FilmArray systems--BioFire 2.0 and BioFire Torch--are easy to use, and can run eight different commercially available US Food and Drug Administration cleared diagnostic panels and three additional panels that have been authorized for emergency use and six environmental test panels. The tests include a respiratory panel that was developed to quickly identify and discriminate respiratory diseases such as COVID-19, emerging coronaviruses, and COVID-19.

The Biomedical Advance Research and Development Initiative, part of the US Department of Defense Strategic Access Program has granted the COVID-19 panel with a grant. The COVID-19 system is based on antigens, and allows clinicians to distinguish symptoms caused by COVID-19 from other respiratory infections. This test has similar accuracy to the antigen tests that are rapid and are currently in use.

The company is also developing an SARS-CoV-2 test to be used in its Respiratory Panel 2.1. This multiplexed nucleic acids amplification assay will be available for use on the BioFire FilmArray 2.0 and Torch Systems, and will detect SARS-CoV-2 and 21 other respiratory pathogens in nasopharyngeal and saliva specimens within less than one hour. The assay will be developed built in bioethanol fireplace the shortest timeframe, and FDA approval for EUA and the 510(k), is expected to be granted in Q3 2020.

Although bio-ethanol flame-effect fires are extremely safe to use, they must be kept away from combustible materials such as curtains, blankets and pillows. They should not be placed close to anything that could ignite, and you should always keep flammable objects at least 10 feet from them. The bioethanol fuel must be stored in a dry, secure area where it cannot be easily reached by pets or children.

Simple to use

A bioethanol fireplace is simple to operate and doesn't have a flue to be concerned about. You will require a space to store it as well as fuel. After you've filled the burner, light it. This will create an appearance of an actual flame. When the flame is lit it will warm the room with no smoke. It also produces heat similar to the wood-burning fireplace. They are also easy to maintain and don't require any servicing. Just a quick clean is all they need.

Contrary to most tests that are rapid, the BioFire RP2.1-EZ test employs an syndromic approach to detect the most common signs of infection and can return results in about 45 minutes. The test is for patients suffering from upper respiratory symptoms and has a sensitivity rate of 98%. The test can identify 19 viruses and 3 bacteria in a single sample, making it an excellent option for managing patients.

The BioFire system integrates multiplex PCR testing, sample preparation and result reporting into one integrated platform. This helps laboratories streamline their workflow, and eliminates the need for a sequential approach that involves individual and send-out test. This can lead to improved patient outcomes, as the right test is used first time, and the need for costly culture-based tests is eliminated. The BioFire system can identify pathogens at a individual level and also their antimicrobial resistance gene. This information is more accurate than traditional methods.

Molecular diagnostics are being utilized to improve patient care and outcomes. The BioFire panel RP2.1+ utilizes an syndromic approach to simultaneously target 23 pathogens that are frequently implicated in respiratory infections. The assay is available on the BioFire film array 2.0 and Torch systems and delivers results within 45 minutes.

In the US, this assay is available currently under FDA Emergency Use Authorization (EUA), and will be available commercially after initial DoD demand is satisfied. The BioFire Defense team has also developed a fully automated test-to-result assay that allows for the rapid detection of COVID-19. This assay is in development and will be made available once the initial DoD demands are met.